Pecan Bent Branch Bench (say that five times)
Not too long ago, I got on a kick milling wide slabs on the Lucas Mill. I was milling some pecan branches from a giant tree and the slabs were coming out great. The crazier the section was, the better the slabs were. Then I got to this last branch. It was the smallest in diameter, but I thought it still had potential. My plan was to clean it up and make it more “log like” without the extra branch and then mill the slabs. The problem was that every time I tried to move it with the forklift it kept rolling off of the forks. The forks of the branch made it want to spin, and every time it landed in the same position. It was almost yelling at me to leave it alone, so I did. For awhile, I just kept moving it out of the way so I could work on better logs, and it kept flopping off of my forks.
It took me awhile to clue in, but then I realized that the final piece was going to be a bench cut from the branch and not slabs cut from the branch, and the way it kept landing was the way the bench was going to sit. So, I stopped fighting it and made a few cuts. I ended up with this excellent outdoor bench (and one bonus slab). I milled both the top and bottom to make it sit level at 18″ tall. The widest flat area is 24″ wide, while the entire bench is about 10′ long. I don’t know how much it weighs, but it is very heavy and will require a Bobcat for loading and delivery. The top has been sanded and then finished with Sikkens Cetol, which I have found to be the longest lasting outdoor finish. I expect that the bark will fall off, but so far it is staying on pretty good.
I have never made a bench like this before, and I am quite proud of this one. It looks nice, functions well and is hard to steal. And, the best part is that now, for some reason, it doesn’t roll off of the forks. I guess it is just the way it was meant to be.