Big White Oaks
I want to have this blog be mostly educational, while at the same time entertaining. This one is more for entertainment.
It started with a call about having a tree milled. I talked to Ron (a first-time customer) on the phone to see what he needed. He said that he had a white oak that was down and another that he was going to have taken down, and that he wanted to find out about milling. We talked about sizes and basic pricing for my services and he agreed to have them milled. Ron told me they were about 30″ in diameter on the phone and didn’t sound at all excited about the size of the trees. In my experience that 30″ tree, especially if the customer isn’t gushing about how big it is, is only about 20″ in diameter. Still a good tree, but not that big.
I thought I would just stop by with my truck and load them up on my way to get another tree, assuming that I could get a couple of logs on my truck and have room for a few more. Well, I found Ron’s house at the end of a narrow lane, and all I could see in the clearing was log. Scratch that, logs – big logs. I knew that I was going to have to regroup after I saw the size of these trees. They weren’t the biggest that I have milled (I included a photo of that one too), but they have the most board feet for two trees. In total, the nine logs scale out (Doyle) to about 2500 board feet. My truck can handle about 900 board feet at a time if they fit perfect, but these were not going to fit perfect (more like just barely). I knew I would be lucky to get two on at a time, so I had to call in some backup. Did I mention that these were big?
Anyway, I have them back at the mill now and have started milling them. Most of them are going to be quartersawn, while the upper logs are going to be cut thicker for slabs to show off the curly lumber around some of the big branches. So far, two of them are milled and they look great. Oh, and big!